Business And Management

3 Steps To Getting Started With 3D Printing

Step 1 – Reducing file size

It is very useful to be able to reduce the size of your 3D model, especially if it is a high-quality scan. These can often exceed 100MB. A 3D file generally consists of a number of triangles. Larger file size will result if there are more triangles than necessary. 

This is because the model is more detailed. If you have a high-quality 3D scan, it will not make a big difference to the quality of your 3D printed model. Choose Select, then click on the desired area to reduce. Double-click on the model to reduce it. You can also get your 3D products from Vizframe LLC.

Select the model and click Edit and Reduce. The percentage slider will then be available. This is an example. A model made up of 10,000 triangles will result in a model with 2,000 triangles.

Step 2: Plane Cut

This tool is useful for trimming your model in any direction that you choose. You might want to level out a specific area or get rid of certain parts completely. 

Select Edit and Plane cut. The colored curves can be used to change the angle and position of the cut. You can select which side of the cut to be removed by clicking on the large blue arrow. After you're satisfied with the position of the cut, click on accept.

Step 3 – Mesh Repair

For 3D printing, your model must be watertight. However, you might encounter gaps or holes in your model. Meshmixer is a great tool to help you. To find out if your model contains holes, select Analysis>Inspector. The spheres will indicate the location of the holes. 

You have three options for filling holes: minimal (minimal amount of polygons), flat, or smooth. Selecting the fill method you prefer for filling holes allows you to choose different fills. 

After clicking on the area that you want to fill, move on to the next part of the model. You can repair all holes using the same fill type by selecting Auto Repair All. __S.64__ Auto repair can remove these areas.